www.mri-polytech.com
POLYTRAK® FULL POUR SYSTEM
Cast in place with two layers of SBR rubber mixed with 50% elastic polyurethane flood coat and finished with a topping of coloured EPDM granules broadcast onto the polyurethane compound.
Spreading rates
The following table of spreading rates provide an accurate guide to optimum usage on a perfectly flat substrate. Any undulation or voids may result in additional usage and an allowance must be made for on-site waste or spills. The contractor must ensure that adequate volumes of material are on hand at the time of installation.
Installation data sheets
For more information on the POLYTRAK® Full Pour System visit our MRi Polytech Secure page using the link below to request your user name and password. Once logged in you will have access to more information on POLYTRAK® and the full range MRi Polytech performance and safety surfaces.
Secure log in >>>
Spreading rates
The following table of spreading rates provide an accurate guide to optimum usage on a perfectly flat substrate. Any undulation or voids may result in additional usage and an allowance must be made for on-site waste or spills. The contractor must ensure that adequate volumes of material are on hand at the time of installation.
Installation data sheets
For more information on the POLYTRAK® Full Pour System visit our MRi Polytech Secure page using the link below to request your user name and password. Once logged in you will have access to more information on POLYTRAK® and the full range MRi Polytech performance and safety surfaces.
Secure log in >>>
